LONN-1TX General Pressure Transducer

 Tip: Click on image to enlarge

Product features:

- High accuracy and reliability with Germany-made chip;

- Use of 316L isolation diaphragm and stainless steel case;

- Two-wire system standard 4-20mA signal output; customized RS485 signal or HART signal output is available;

- General precision: 0.25 grade, customized 0.1 grade is available;

- Multiple process interfaces and electrical interfaces are available for selection;

- Multiple pressure types are available for selection;

- In-built advanced anti-interference and surge protection circuit.

Pressure transducer principle:

LONN-1TX general pressure transducer adopts the high-accuracy and high-stability force sensitive chip with stainless steel isolation diaphragm to realize temperature and linear compensation, signal amplification, V/I switch, inverse polarity protection, and current limiting when pressure overloaded through laser resistor trimming and advanced thick-film technology. It outputs industry-standard 4-20mA or 0.5-4.5V or RS485 signal. 

Field of application: 

It can be used to measure the pressure, absolute pressure and negative pressure of corrosive gases, liquids and steam in the fields of petroleum, chemical industry, metallurgy, electric power and environmental protection. It can also be used to measure the pressure under low vacuum, atmospheric pressure and harsh environment.

Technical parameters:

Range

-10005, 100, 500, 800, 1000kPa

02, 10……100MPa

Pressure type

Gauge pressure, negative pressure and absolute pressure

Output signal

420mA, 420mA+HART protocol, RS485 protocol

Input voltage

830V DC

Accuracy

0.1

0.20.25

0.5

Nonlinear repeatability delaying

0.1

0.20.25

0.5

Zero and sensitivity drift

0.01

0.020.025

0.005

Temperature compensation

-10℃70℃

Work temperature

-20+85℃

Long-term stability

≤0.1±%FS/year

Response time

1ms

Overload capacity

200%

Load resistance

R=(U-12.5)/0.02-RD

U=power voltage; RD=internal resistance of power source

Measurement medium

Corrosive media compatible with 316L

Diaphragm material

316L stainless steel, heusler alloy C-276

Case material

1Cr18Ni9Ti

Protection rating

IP67

LONN-1TX General Pressure Transducer

Download: here